Sika India Pvt. Ltd.
 
Brand Name Description Uses
 

Concrete Admixtures 

 

Plastocrete Plus 

A concrete/mortar admixture in liquid from that acts both as a highly efficient plasticizer and water-proofing compound.

It is recommended for use in structural and mass concrete, particularly for water-retaining structures, such as reservoirs and dams, sewerage works, canals, culverts, tunnels, roof slabs, rendering and wherever water-proof concrete is required.

 

Mould Release Agents / Curing Compound / Surface Retarders

 

Separol Concentrate

An oil based shutter release agent in concentrate from dilutable with diesel oil.

In the diluted form, when applied to steel, plastic or timber formwork allows clean, fast and easy stripping.

 

Sika Form Oil

Carefully blended combination of refined emulsified mineral Oils, When mixed with water at a recommended dilution, it produced a thin film of stable release agent.

When applied to steel and timber formwork allows clean, fast and easy stripping.

 

Mortar Admixtures

 

Intraplast                EP & N 200

These are expanding grout admixtures for pressure grouting. By introducing into the grout mix, wet volume expansion and increased fluidity without segregation are produced.

Used to increase cohesion in cement grouts and to develop nonshrink property. This product can be used for grouting of prestressed cable ducts, rock and soil anchoring bearing plates, pre-placed aggregates and tunnel linings.

 
Cementitious Grouts and Anchoring
 

SikaRep- Microcrete

It is a factory designed repair concrete with selected cement, aggregate and other chemicals to produce pourable / pumpable but non-shrink and cementitious concrete at the site condition when mixed with recommended quality of water.

It is mainly recommended for the repair of damaged concrete structures Columns, Beams, slabs, etc. It is also recommended for grouting of large gaps.

 

Polymer Modified Cement Mortars

 

Cemflex

A polymer for making a cement based polymer modified waterproofing  flexible slurry coating.

It is used for external and internal waterproofing, damp proofing hairline crack sealing ad protection from chloride water tanks, basements, terraces and balconies, bridge retaining walls, sea walls, small flat roofs, abrasion resistance lining for silos.

 

Structureal Strengthening 

 

Sikadur 30 LP

Solvent-free thixotropic, epoxy-based two - component adhesive mortar.

It is an adhesive for bonding reinforcement and adhesive mortar on Concrete, stone, brick and blockwork, steel epoxy, wood. It is also used for structural bonding of Sika CarboDur laminates to concrete, steel wood brick and blockwork, steel plates to concrete, concrete elements, bridge segments. It is used for bonding of starter bars, wallanchor, fixings etc.

 

Sika CarboDur 

Heavy-duty strengthening system for reinforced concrete and timber. 

It is now possible to make bonded reinforcement for reinforced concrete and timber structures with corrosion-resistant laminates made of carbon fibre reinforced polymers (CERP). It is possible to apply the CarbDur system, after preparation of the concrete or timber surface, without any other installations. This makes the bonded reinforcement method more economic. 

 

SikaWrap 230G/ Sikadur 330

Externally applied strengthening or repair system for structural members made of reinforced concrete, masonary or timber.

It is a strengthening of reinforced concrete structures, brickwork and timber in case of flexural shear load due to increase of loading capacity, changes of building utilization, repair of defects, prevention of defects caused by earthquakes and meeting of changed standards or specifications.

 

SikaWrap 430G/ sikadur 330

Externally applied strengthening or repair system for structural members made of reinforced concrete, masonary or timber.

It is a strengthening of reinforced concrete structures, masonary and timber in case of flexural shear load due to increase of loading capacity, changes of building utilization, repair of defects, prevention of defects caused by earthquakes and meeting of changed standards or specifications.

 

Protective Coatings and Impregnations

 

Friazinc R

A high pigmented, zinc rich primer based on epoxy resin.

As an anti corrosive coating or as primer especially suitable for objects subjected to mechanical wear, e.g. pressure pipe lines, gates, penstocks, tanks, etc. This is also recommended as anti-corrosive coating for reinforcement roads.

 

Floor Treatment and Toppings 

 

Sikafloor83 EpoCem

A normal setting modified cementitious trowellable floor toppings. Provides moisture barrier for subsequent epoxy resin based product application.

Floor topping in meat processing, breweries, canning factories, fish factories, Pharmaceuticals factories, areas continuously exposed to water, areas requiring resistance to chemical etc.

 

Sikafloor 7530

A low solvent pigmented textured coating based on epoxy resin.

As anti-skid floor coating for industrial floor specially recommended for wet areas like wash rooms, cloakrooms, and drying rooms, textile plants, food processing industry, laundries. Also suitable for use as a floor coating where high mechanical strength and resistance to chemical attacks are called for.

 

Sikafloor 89

Solvent-free, waterthinnable, colored coating on epoxy resin.

Industrial floors subject to light to medium wear on chemical and pharmaceutical industries, car parks and warehouses, basements and air raid shelter. It is used for wetrooms such as changing rooms, laundries. As wall coating where higher chemical and mechanical resistance are required.

 

Sikafloor 105

This is sophisticated epoxy coating with high mechanical and good chemical resistance.

It is used on floors made of concrete, epoxy screed, metal, etc., intended for industrial floorings with normal to moderate loading, chemical & pharmaceutical industry, garages and warehouses power station, etc.

 

Sikafloor 2530 W

It is a high performance colored, 2-Component dispersion, based on epoxy resin.

It is used on floors made of concrete, epoxy screed intended of light and medium exposure, production and storage halls, Garages and Warehouses.

 

Sikafloor Curehard 24 

One-component crystallizing catalyst in liquid form.

It is used on any horizontal old or new concrete surface, interior or exterior where a hard, light to moderate abrasion resistance is required for educational and medical facilities, warehouses and industrial plants, food-processing plants, stores and shopping malls, parking structures, service stations, offices and multiresidential buildings.

 

Joint Sealing Compounds

 

Sikaflex Construction

Permanently elastic one component joints sealing compound on polyurethane based.

Used for movement joints in facades, roofs & floors, bridge cantilevers, retaining walls & subways. It is also used for caulking of window sashes & doors, skirting, wall/floor joints, shutter housings, and general purpose.

 

Sika India Pvt. Ltd.,
Flat No. 504, Swarg Nivas Enclave,
5th floor, Behind Maithri Bhavan, 
Ameerpet, Hyderabad-500 038.
Ph: (040) 23734335/0466 Fax: (040) 23734335
E-mail: sikahyd@rediffmail.com
Website: www.sikaindia.net